2022 KTM 450 SX-F FACTORY RACE EDITION

On Sale $8,295.00
Was $8,495.00
Sale: Save $200.00 now until 03/31/2025
On Sale $8,295.00
Was $8,495.00
Sale: Save $200.00 now until 03/31/2025

Key Features

Availability In Stock
LocationEvolution Powersports
Primary ColorORANGE
Condition Good

Product Features

Dealer Notes
JUST IN IS THIS SUPER CLEAN USED MOTOCROSS DIRTBIKE!!!

2022 KTM 450 SX-F FACTORY RACE EDITION

VERY LOW HRS OF USE AND STILL HAS THE ORIGINAL TIRES

THESE ARE GREAT BIKES FOR MOTOCROSS OR A WEEKEND IN THE WOODS

THIS ONE IS POWERED BY A FUEL INJECTED 450CC 4STROKE ENGINE AND HAS ELECTRIC START WITH MODE SWITCHES THAT INCLUDE TRACTION AND LAUNCH CONTROL

THIS IS ONE VERY VERY FAST DIRTBIKE

PRICED @ $8,295.00

WE OFFER SAME DAY FINANCING

WWW.EVOLUTION-POWERSPORTS.COM

2400 LANCASTER PIKE
READING PA 19607
484-624-5045

Description

READY TO RACE has never been more accurately defined than with the 2022 KTM 450 SX-F FACTORY EDITION. With its development based on the success and feedback of Red Bull KTM Factory Racing riders around the globe, and 400-units-only exclusivity, it is the perfect mount for budding supercross champions.

Engine & Exhaust
  • Engine: The 2022 KTM 450 SX-F FACTORY EDITION is powered by a lightweight but heavy-hitting brute of an engine. Punching out massive HP, but weighing in at only 59 lb (26.8 kg), this SOHC powerplant is the undisputed champion of holeshots. For 2022, the engine has been rotated 2 degrees backward, resulting in a 3 mm lower front sprocket position. The benefits? Dramatically improved mass-centralization for easier handling and maneuverability and better anti-squat behavior.
  • Cylinder Head: Redesigned to be lighter and more compact, this SOHC cylinder head uses a shorter profile, locating the camshaft closer to the center of gravity. This together with parallel frame mounts significantly improve handling and agility, while four ultra-lightweight titanium valves - 40 mm for the intake and 33 mm for the exhaust - are activated via extremely rigid rocker arms, which are DLC coated on the intake side. A new valve cover reduces the number of mounting screws needed to only 2, while a single oil spray jet guarantees efficient cooling to further save on weight.
  • Crankshaft: The crankshaft on the KTM 450 SX-F FACTORY EDITION is located in an ideal position close to the center of gravity, utilizing a short connecting rod, allowing for snappy power delivery. The entire construction is extremely well-balanced, with the perfect amount of inertia for optimal traction and rideability. This design also enhances durability, allowing for longer crankshaft service intervals - resulting in less effort in the pits, and more time on the podium.
  • Crankcases And Engine Covers: All-new engine cover designs feature a textured surface for greater wear resistance and a slick new look thanks to its black finish. A high-pressure die-cast production process keeps the overall weight to a minimum, but optimizes mass-centralization and increases efficiency. A new steel oil pump gear and repositioned oil jets increase the overall oil pressure, resulting in improved overheating resistance and durability.
  • Transmission: Thanks to a redesigned Pankl Racing Systems 5-speed transmission, the KTM 450 SX-F FACTORY EDITION really shifts! With a focus on durability and reliability, a revised 29:72 ratio, and a weight-optimized shift shaft, operating force is reduced making for smoother, slicker shifting. But for really fast up-clicks, a new Quickshift sensor allows clutchless upshifts and can be toggled on or off via the new QS handlebar switch. A new gear shift lever design also prevents dirt build-up and keeps the lever tip in its original position even in the toughest conditions.
  • Engine Management System: A state-of-the-art KEIHIN engine management system, with electronic fuel injection and 44 mm throttle body, ensures fuel is used as efficiently as possible with maximum power as a result. The injector position guarantees optimal atomization of the fuel and air on the way to the combustion chamber, resulting in instant throttle response and thanks to the repositioning of the air filter box, more mid-range grunt too.
  • Cylinder And Piston: The 95 mm bore cylinder houses a lightweight CP piston, made to the very highest standards and stress levels. Its design contributes to the big 4-stroke's low vibrations and overall engine speed. Due to the low oscillating masses, the engine is not only powerful but also displays extremely lively characteristics, smoothly rocketing out of corners, while an increase in compression to 13.1:1 adds more shove to the top end performance.
  • Balancer Shaft: The multifunctional side-mounted balancer shaft masterfully balances all the oscillating forces, while also driving the water pump. It effectively keeps engine vibrations to a minimum, resulting in the smoothest ride, even at the highest engine speeds.
  • Clutch: The 2022 KTM 450 SX-F FACTORY EDITION features an updated DDS clutch, a single diaphragm steel pressure plate instead of traditional coil springs, and an integrated damping system. The clutch basket is CNC milled from a single block of steel that allows the use of thinner steel liners and is a major contribution to the compact engine design. The benefits? Better traction and durability, improved clutch cooling, reducing clutch fade and heaps of gains in the trophy department.
  • E-Starter: The standard electric starter on the KTM 450 SX-F FACTORY EDITION uses a proven starter drive and a strong electric starter made by Mitsuba. As demonstrated time and time again, it provides quick and reliable starting, saving you precious time and energy when you need it most. A new, combined start/stop switch on the right side of the handlebar allows for easy and intuitive firing up.
  • Cooling: Just like a championship contender, a high-performance race weapon also needs to stay cool under pressure. Thankfully, a set of radiators ideally positioned for a lower center of gravity, ensure this machine keeps it's cool. By using computational fluid dynamic technology together with a clever cooling circuit routing, the innovative system ensures the optimum engine temperature for the highest performance, no matter what the conditions.
  • Exhaust: When it comes to power delivery and performance, the exhausts on all KTM SX-F FACTORY EDITION models feature a model-specific header with an advanced Flow Design resonance chamber and a short, compact aluminum silencer that stays well within noise regulations. The header joining position and new, standardized mounting points and screw lengths across the 4-stroke exhaust systems design also allows the exhaust to be disassembled without removing the shock absorber, saving time in the pit lane, and gaining it out on the track. In this case, we'll let the sound do the talking.
Chassis
  • Chassis: Few sporting disciplines are as demanding on rider and machine as professional supercross with riders experiencing G-forces of up to 14Gs multiple times a race. The KTM 450 SX-F FACTORY EDITION chassis takes this into account and focuses on improved energy absorption, getting the power down more effectively, and improving overall acceleration. In other words, it makes it easier for rider to go faster.
  • Frame: Made from hydro-formed, laser-cut steel, and engineered to cope with the exceptional stresses of competitive supercross, the frame is designed to offer unmatched rider feedback and high-speed stability. New parallel frame mounts improve flex characteristics, while the topology-optimized frame wall thickness improves rigidity and high speed stability. The frame is finished off in a high-gloss orange powder coating and comes fitted standard with frame protectors, featuring a new and improved texture for superior protection, durability, and grip.
  • Subframe: Featuring polyamide-reinforced aluminum construction, this 2-piece subframe reduces the overall subframe weight to only 4 lb (1.815 kg). Although lightweight, it is remarkably robust with a specifically engineered rigidity delivering outstanding handling and feedback. Cast aluminum lower subframe spars and frame mounts add extra stiffness.
  • Swingarm: An all-new hollow, die-cast aluminum swingarm has been developed alongside the frame. Designed to offer optimal stiffness and reliability at the lowest possible weight, the topology has been optimized for ideal rigidity while an improved casting process reduces weight by 190 g. A new 22 mm rear axle is also fitted to further complement flex characteristics. The design also works to reduce mud build-up and offers easy chain adjustment with markings visible from above.
  • Suspension: When it comes to getting power to the dirt, the suspension plays a critical role. The KTM 450 SX-F FACTORY EDITION boasts a revised WP XACT front fort with an all-new WP XACT shock absorber resulting in dramatically improved anti-squat and rebound performance and better acceleration after landing. What all this means is, this rocket of a racer gets its power down like a nuclear substation.
  • Front Suspension: Revised and reworked for 2022, the KTM 450 SX-F FACTORY EDITION's 48 mm WP XACT front forks with AER technology feature a capsulated air spring and pressurized oil chamber for progressive and consistent damping. New hydrostops in the fork legs improve bottoming-out resistance and have less rebound, improving progressive damping in the last 40 mm of travel. Redesigned fork protection rings also increase protection against dirt intrusion, meaning longer lasting fork seals. They're also easily adjustable thanks to handy clicker dials. Heel-clickers on the other hand are totally optional.
  • Triple Clamp: Made from high-grade aluminum and boasting full-factory anodized credibility, the adjustable CNC milled Factory Racing triple clamps are tuned to offer optimal steering stem stiffness and pin-point perfect fork alignment and geometry. These together with newly designed, topology optimized bar mounts, provide increased bar grip resulting in less bar twist at no additional weight. Additionally, they allow for both rubber damped and fixed mounting options providing customizable vibration control and handlebar flex.
  • Rear Suspension: An all-new and fully-adjustable WP XACT SHOCK design results in a myriad of benefits. Firstly, it's shorter and lighter than before but leaves suspension travel unchanged at 300 mm. A new CFD optimized main piston improves initial comfort and resistance, while differently sized flow holes allow the shims to open more easily and reduce the overall pressure. Adjustments are also easy thanks to a hand-adjustable dual compression control allowing high and low-speed settings by hand. This is flanked by a new preload adjuster and a new two-piece spring retainer that allows for quick mounting without splitting the shock.
  • Wheels: High-strength DID Dirt Star rims finished in gloss black with laser engraved logos are coupled to orange CNC milled hubs, lightweight black spokes, and aluminum orange anodized spoke nipples. Speaking of which, the nipples incorporate an advanced low-maintenance design which reduces the frequency of spoke checks. On the outside, Dunlop GEOMAX MX33 Motocross tires, feature the proven "block-within-a-block" design for unmatched grip and superior berm-slaying corner hauling.
  • Brakes: Those who brake hardest, go fastest. Thanks to range-topping Brembo stoppers at both ends, the KTM 450 SX-F FACTORY EDITION can stop and turn like a cheetah on the hunt. Braking comes courtesy of a 220 mm solid rear brake disc and a 260 mm semi-floating front brake disc featuring a new polyamide composite front disc protector for added protection.
  • Fuel Tank: An all-new 1.9-gal (7.2-liter) polythene fuel tanks incorporate a threaded fuel tank cap and an integrated one-piece fuel pump and filter for improved fuel supply. The fuel pump also allows for the tank to be emptied further down, which means longer ride times. The benefit? Less time worrying about refueling and more time focusing on the win.
  • Airbox: Designed to offer maximum airflow at minimum effort, the air filter box has precisely positioned inlet ducts aimed at preventing air deformation when you get on the power. The air filter is also easily accessed without tools, simply by removing the left side panel, making for quick and easy maintenance. Best of all, the Twin Air filter and air filter support design ensures a simple fail-proof mounting system for safe and accurate filter installation. Need more air? A vented air filter box cover comes included.
Ergonomics & Comfort
  • Footpegs: An all-new die-cast footpeg design offers a larger surface to step on while being less susceptible to hook on deep ruts, take-offs when scrubbing, or track barriers, while ensuring riders maintain full control in any track condition. This is thanks to a new mounting concept integrated in the frame design which also saves weight, with less chance of clogging up.
  • Seat: It doesn't get more factory than this. Featuring a flat seat profile with the race-proven Selle Dalla Valle high grip seat cover, the KTM 450 SX-F FACTORY EDITION awards riders with exceptional control - even when covered in mud. A recessed grip pocket under the seat, just above the air filter box, makes it easy to move the bike around, but also highlights the lightweight character of the SX-F FACTORY EDITION range.
  • Handlebar: When it comes to banging bars and getting the elbows out, the KTM 450 SX-F FACTORY is equipped with high-strength NEKEN handlebars with a proprietary KTM bend and ODI grips that deliver optimal control. A newly designed KTM branded handlebar pad also guards against any unwanted impacts, and features the same design patterns as seen on the frame protectors and tank spoilers.
Bodywork & Graphics
  • Decals: There is no mistaking the KTM 450 SX-F FACTORY EDITION for anything else at the starting gate. With a full-factory racing look and high-tech in-mold application, sponsor logos and graphic design elements are sure to stay put - even after a full season of hard racing.
Software & Electronics
  • Map Selection: A new map select switch comes standard on the KTM 450 SX-F FACTORY EDITION and takes care of launch control, engine mapping, Quickshifter and activates traction control - on the fly. Map 1 produces a more linear power spread for trickier conditions, while map 2 unleashes the full READY TO RACE experience with sharper throttle response and explosive power delivery for all-out battles.
  • Launch Control: Some may call it an unfair advantage. We call it being prepared. Launch control is easily engaged by holding down the traction control and Quickshifter buttons at the same time. This limits the amount of power to the rear wheel - ensuring maximum traction - and ensures you rocket off the line when the gate drops.
  • Traction Control: Traction control gets the power to the dirt in the most efficient way possible, by analyzing throttle input from the rider and the rate at which RPM increases in the engine. If the RPM increases too quickly, the EMS registers a loss of grip and reduces the amount of power to the rear wheel, which ensures maximum traction. This offers racers distinct advantage in wet or muddy conditions.
  • Quickshifter: The new Quickshifter function can be activated or deactivated via the new map select switch, and allows riders to make clutchless upshifts. The function works by interrupting the ignition for a fraction of a second, letting you click in the next gear quicker and smoother. To prevent unintended shifts and false neutrals, the function is only active between 2nd to 5th gear, meaning the only thing you'll be clutching - is the win.
Engine Specifications
  • Transmission: 5-speed
  • Starter: Electric starter
  • Stroke: 63.4 mm
  • Bore: 95 mm
  • Clutch: Wet, DDS multi-disc clutch, Brembo hydraulics
  • Displacement: 449.9 cm³
  • EMS: Keihin EMS
  • Design: 1-cylinder, 4-stroke engine
Chassis Specifications
  • Weight (without fuel): 103.5 kg
  • Tank capacity (approx.): 7.2 l
  • Front brake disc diameter: 260 mm
  • Rear brake disc diameter: 220 mm
  • Chain: X-Ring 5/8 x 1/4"
  • Frame design: Central double-cradle-type 25CrMo4 steel
  • Front suspension: WP XACT-USD, Ø 48 mm
  • Ground clearance: 343 mm
  • Rear suspension: WP XACT Monoshock with linkage
  • Seat height: 958 mm
  • Steering head angle: 63.9 °
  • Suspension travel (front): 310 mm
  • Suspension travel (rear): 300 mm
NOTES:
The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that errors, for instance in printing, setting and/or typing, may occur; such information is subject to change without notice. Please note that model specifications may vary from country to country. In the case of coated surfaces, there may be color differences due to the usual process fluctuations. The consumption values stated refer to the roadworthy series condition of the vehicles at the time of factory delivery.

Engine

Engine Type 1-cylinder, 4-stroke engine
Displacement 449.9 cm³
Fuel System Keihin EMS

Chassis

Front Suspension WP XACT-USD, Ø 48 mm
Rear Suspension WP XACT Monoshock with linkage

Dimensions

Dry Weight 103.5 kg
Fuel Capacity 7.2 L
Ground Clearance 343 mm
Seat Height 958 mm

Transmission

Transmission 5-speed
Final Drive Chain: X-Ring 5/8 x 1/4 in.

Shopping Tools